Contact Us
If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.
The purpose of Fit Testing is to identify that a specific make, model, size of a tight-fitting respirator (face-piece)...
Fit testing should not be seen as a one-time procedure. It must be reviewed on a case-by-case basis to...
Fit Testing Guidance INDG 479 was raised by the British Safety Industry Federation (BSIF) working alongside UK HSE. The...
Yes, full face masks must undergo a face fit test. This requirement applies to all tight-fitting respirators, including full...
No, full face masks cannot be tested using a qualitative fit test method. This is because a much higher...
(assuming the mist from the Bitrex® is meant here) a high efficiency particle filter would be suitable. However please...
To be deemed competent, an individual must be trained and experienced in conducting the fit test method. They must...
According to guidance from the Health and Safety Executive (HSE), tight-fitting respirators should not be used with any facial...
The INDG 479 is an official document offering Fit Testing guidance, published by BSIF (British Safety industry Federation) working...
Yes, three companion documents have been created to support INDG 479. These documents were produced by the Health and...
The companion documents to INDG479 outline the main recognised methods for conducting fit testing on respiratory protective equipment (RPE)....
Fit2Fit Companion Documents, which provide official guidance and best practice on face fit testing, can be accessed directly from...
Fit testing is a legal requirement for any tight-fitting respirators used in the workplace. This ensures that the mask...
Any worker who is required to wear tight-fitting Respiratory Protective Equipment (RPE) must undergo a face fit test. This...
Fit testing must be conducted before a tight-fitting respirator is used in any hazardous environment. Ideally, this should take...
Fit testing of Respiratory Protective Equipment (RPE) must be conducted by someone who is competent and experienced in the...
There are two recognised types of respirator fit testing: qualitative and quantitative. Each method has its own application and...
Everyone’s face is different in shape, size and proportions, so a single type or size of respirator will not...
The INDG479 document is a guide provided by the Health and Safety Executive (HSE) working alongside BSIF (British Standards...