CR2 reflective decals are designed to enhance the visibility of your safety helmet, especially in low-light environments. For the best results and durability, it’s important to apply them correctly.

Fitting Instructions:

Ensure the helmet is clean and dry

• Use mild soap and warm water to clean the surface of the helmet.
• Dry with a soft cloth and make sure there is no residue, grease, or moisture.

Work in a clean, dry environment

• Apply decals in an area free from dust, dirt, or extreme temperatures.
• Ideal temperature for application is between +10°C and +25°C.

Position the decals carefully

• Use the guides included with the decal pack to correctly position each piece.
• Make sure the decals align with helmet contours and do not cover any ventilation or accessory slots.

Apply pressure evenly

• Once positioned, press down firmly starting from the centre of each decal and working outwards.
• Smooth out any air bubbles as you go to ensure full adhesion.

Allow time to bond

• Avoid handling or fitting accessories over the decals for at least 24 hours, allowing proper adhesion.

Important Notes:

• Only use CR2 decals supplied or approved by JSP to ensure compatibility with helmet materials.
• Do not apply decals over cracks or damage on the helmet.
• Applying unauthorised decals or adhesives can compromise the performance and compliance of the helmet.

If you need further support, please contact our Technical Support Team using the email:
technical@jspsafety.com or contact us via our WhatsApp.

Key Points:

• Clean and dry helmet before applying decals.
• Apply in a clean, dust-free area at moderate temperature.
• Position decals carefully using provided guides.
• Press firmly and avoid handling for 24 hours.
• Use only JSP-approved CR2 decals for guaranteed compatibility.